Description
1/4" NPT port, brass body, VITON seals, 12 volt DC, for air, water, or fuel (disel, gasoline, oils and other hydrocarbons). U. S. Solid normally closed (N/C) electric solenoid valve is constructed with a durable brass body, two-way inlet and outlet ports with one-quarter inch (1/4") female threaded (NPT) connections, and heat and oil resistant Viton seals. The direct current coil energizes at 12 volts DC; (It doesn't not matter which line is positive and which is negative, the valve will energize identically) Voltage range + or - 10%. 12 Watt power rating. Direct lift valve operates from 0 PSI to a maximum pressure of 145 PSI (0 MPa to 1.0 MPa). Operational pressure range for water: 0 to 101 PSI; for oil: 0 to 72 PSI; for air or gases: 0 to 101 PSI. 1/4" (2.5 mm) flow aperture permits a unidirectional flow capacity of 0.23 gallons per minute (GPM) of water at 60F with a pressure drop of 1 PSI (0.23 Cv). Operational temperature range is 14 to 248 degrees Fahrenheit; -10 to +120 degrees Celsius. Suitable for outdoor use; not for use underwater. Suitable for use with hot or cold water, gas, air, very low viscosity fluids (< 20 cst), oils and hydrocarbons, e.g., gasoline, kerosene, or diesel fuel. Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, water exchange for aquarium, air horn, or bleeding moisture from an air tank, auxiliary gas tanks and many other. Manufactured in China. Model: USS2-00051. Quality assurance and/or conformity managed in accordance with standards:
|
