Description
Onown Pickup Wiring Kit PIckup Piezo 50mm Sensitive Transducer Pickups Prewired Amplifier with 6.35mm Output Jack for Cigar Box Guitars and Acoustic Instruments
It is very large and can collect a wider range of sound in case you are not sure where are the best parts of the sounds.
This is a pre-wired, pre-soldered piezo and jack harness which make it easy for you. All you have to do is to attach the piezo in or on your build, drill a hole and mount the jack. Then you're done!
Installation instruction:
1. Take the plastic film down from the back of transducer to expose the adhesive 2. Place the transducer through the sound hole to the lower part of the front body where the guitar produces the best tonal response 3. Drill a hole from inside the body, loosen the end-pin jack nut, insert it to the hole and tighten the nut The above procedures depend on different instruments. Specifications:
Material: Metal & Piezoelectric Ceramic Sensor Color: Shown as Pictures Sensor Diameter: Approx. 50mm/1.96inch Interface Diameter: Approx. 6.35mm/0.25inch Cable Length: Approx. 35cm/13.7inch Weight: Approx. 27g
|
