Application: suitable for orthopedics fixation.
Immersion: Press one end plastic filling and gently immerse the bandage in 25~30'C water in 45 degree for no less than 15 seconds until there is no air bubbles.
Squeeze dry: carefully remove the bandage from the water to another utensil and gently squeeze out the excess water from two ends to the center with both hands. Do not twist or excessively squeeze bandage in case of too much gypsum powder loss.
Shaping: bandage that has being squeezed should be used immediately, so as not to lose the plasticity of gypsum.
Wrapping: Dressing with the general method of overlapping circles, not excessively tighten the bandage. The ordinary parts are wrapped with 6~8 layers of bandage and the forced parts are wrapped with 8~10 layers of bandage.
Level up: in the dressing, level up the bandage to remove air bubbles, so that the adhesion between layers can be uniform and the appearance can be smooth and uniform. Don't touch it again when the plaster starts to clot
Cure time: 4-8 minutes.